Kits, Seals, Gaskets
Please view our Order Info page before contacting us for an order, Thank You!
 |
4T65E "Overhaul" Kit | $74.95 | An Overhaul kit includes all necessary seals, gaskets, o-rings, sealing rings, lower pan gasket, and some general info sheets. These kits do not include a new side cover gasket! These kits are made by TransTec. |
 |
4T65E "Banner" Kit | $144.95 | A Banner Kit includes everything from an Overhaul Kit and also includes all friction plates needed as well as 2nd and 3rd gear molded pistons. We use Borg Warner frictions in our transmissions and that is also what we sell in our kits. Please specify year needed as there are a few differences. |
 |
4T65E "Master" Kit | $169.95 | A Master Kit includes everything that the Banner Kit includes but this kit also adds new steel plates to complete the clutch plate package. Again we will need to know trans model year to make sure plates are correct. |
 |
4T65E "Master" Kit with Z-Pack 3rd | $209.95 | This Master Kit includes the same components as above but includes the Raybestos ZPack 3rd clutch set. This is not a clutch pack that we use in our performance rebuilds but due to popular request we have added it to the lineup. It is a more durable clutch pack than the OE friction setup and is a good upgrade in heavy duty or high performacne application that will better handle abuse with a stock rebuilt transmission without our modifications |
 |
4T65EV/GT Volvo "Master" Kit | $179.95 | This Master rebuild kit includes the above parts but also includes specific 4th friction plates that are used in the Volvo versions. These kits also include the Volvo specific valve body gaskets and passanger side axle seal. |
 |
4T65EV/GT Volvo "Master" Kit with Z-Pack 3rd | $219.95 | This Master Kit includes the same components as above but includes the Raybestos ZPack 3rd clutch set. This is not a clutch pack that we use in our performance rebuilds but due to popular request we have added it to the lineup. It is a more durable clutch pack than the OE friction setup and is a good upgrade in heavy duty or high performacne application that will better handle abuse with a stock rebuilt transmission without our modifications |
 |
4T65E Side Cover Gasket | $64.95 | This gasket doesnt always need to be replaced and as mentioned above is NOT included in any rebuild kits. If your orginal side cover gasket is in good condition than it is fine to reuse, using your best judgement of course! |
 |
4T65E Lower Pan Gasket | $29.95 | This is an OE style molded rubber and metal lower pan gasket. These are reusable gaskets but do age and can leak over time and may need to be replaced while servicing your transmission or installing a shift kit |
 |
4T65E Accumulator Body Gasket | $9.95 | When installing a shift kit in these transmissions you are required to remove the accumulator body and dissassemble it and this gasket is between the two halves. Though it often can be reused it is best to replace to avoid any leaks and the possibility for low pressure and lazy shifts |
 |
4T65E Channel Plate Gasket set, Metal | $14.95 | This set includes a new upper and lower channel plate gasket and required for channel plate replacement or internal repair if not purchasing a full gasket set. These gaskets are the latest metal aftermarket design. |
 |
4T65E Valve Body Gasket Set | $9.95 | This is a valve body gasket set that is required when removing the valve body. These gaskets will work for 97-02 model transmissions. All 03+ and some 02 transmissions came with a plate with bonded gaskets and this plate should be replaced any time the valve body is removed. Please see below for the newer style plates. We have GM and Volvo version gaskets available. |
 |
4T65E GM version Bonded Valve Body Spacer Plate | XX.XX | These are the most recent and currently used spacer plates used in the 4T65E Transmission. Standard for 03+ models and also available for 02 and earlier models. These are one-time use plates and should not be reused. There are numorous different plates with different costs, please contact us for the correct one for your application. |
 |
4T65EV/GT Volvo version Bonded Valve Body Spacer Plate | XX.XX | These are the most recent and currently used spacer plates used in the 4T65EV/GT Transmission. Standard for 03+ models and also available for 02 and earlier models. These are one-time use plates and should not be reused. There are numorous different plates with different costs, please contact us for the correct one for your application. |
 |
4T65E Torque Converter Seal | $4.95 | |
 |
4T65E Drivers Side Axle Seal | $4.95 | |
 |
4T65E Passanger Side Axle Seal | $4.95 | |
 |
4T65EV/GT Passanger Side Axle Seal | $9.95 | This passanger side axle seal is specifically for the Volvo 4T65EV/GT models. |
